Bambu Lab Cool Plate (SuperTack) - H2D Pro, H2D, H2S [FAP040] Soğuk Tabla

Say goodbye to print failures with super reliable surface adhesion! SuperTack Pro coating provides ultra-strong adhesion to PLA and PETG filaments, even at lower heatbed temperatures. It enhances printing success by eliminating adhesion issues, reduces warping when printing large objects and works well with bad shape surface.

SuperTack Pro vs SuperTack

The "Pro" variant builds on the standard SuperTack with a few performance upgrades:

• Longer lifespan: Around 25% longer durable sticky performance before noticeable wear
• Better scratch resistance: More robust surface makes it slightly harder to damage
• Lower recommended bed temperature: Can offer reliable adhesion at even cooler beds (e.g., about 40 °C for PLA vs about 45 °C on standard SuperTack)
• Smoother part removal when cooled: Slightly easier to pop parts off once the bed cools down

Key features

• Reliable surface adhesion
• Durable coating for long-lasting performance
• Natural texture seamlessly hides the bottom surface
• Designed for PLA and PETG

Considerations

• Use the scraper included with your printer to gently lift the print, then carefully pry it off. Warning: The surface is soft, so be careful when using the scraper. If the print is sticking too tightly, heat the plate on the heatbed to 50°C to assist with removal.
• The H2C print bed is slightly smaller than the H2D because the Vortek hotend rack occupies additional space. Tip: Ensure you select the correct model when purchasing.
• Do NOT print with TPU filament, as it will damage the build plate.
• Increasing the heatbed temperature enhances adhesion. Adjust the temperature based on your print requirements for the best results.
• For X1, P1, and A1 printers: before auto-leveling, rub the nozzle in the special wiping area of the build plate to remove residual material. The coating in this area will wear over time. This is normal and does not affect print quality or nozzle lifetime.
• Bambu Cool Plate SuperTack Pro is a consumable part and will degrade over time. The warranty covers manufacturing defects only, not cosmetic damage like scratches, dents, or cracks. Only defective sheets upon arrival are covered by the warranty.
• SuperTack Pro provides strong adhesion without adhesive or frequent cleaning. You can clean it with water and dish soap if it becomes dirty. Do NOT use organic solvents (especially acetone), as they will damage the surface.
• Bambu PLA Silk+ works well on SuperTack Pro thanks to its improved layer adhesion. Other PLA Silk materials may stick too strongly and could damage prints. Recommendation: Use Bambu PLA Silk+ or, for third-party PLA Silk, select the Generic PLA Silk preset in Bambu Studio and test for compatibility.

Model Overview

Features

Eliminates Adhesion Issues

 

Reduces Warping when Printing Large Objects