Finally, Desktop Laser SLA
3D Printer That You Asked For
Do not ever worry about misprints, get finely detailed prints every and each time.
Secure your %30 discount now and help us with final details of our Technology
Launching soon on KICKSTARTER!
Introducing Masitte
Well-picked quality parts for a reliable 3D Printer
UV Transparent Optical Quartz Glass
Heater for Optimum Printing Environment
Air Flow System
High-Precision Linear Motion System
F-Theta Lens
405 nm UV Laser
High-Precision Laser Scanning System
Aerospace Grade Aluminum
RS Technology
Introducing RS (Reduced Separation) Technology that avoids FEP film stickings to optical glass which causes support breakdowns and print not sticking to the bed, high rubbing noise because of strong pullings and failed prints.
RS Coated Glass
Highest UV Transmitting XXX Coated Glass that is totally different than any other laser printer which have the least sticking surface ever achieved.
UV Laser
Combination of laser spot size and laser beam control for fine quality detailed print.
RS Air Flow System
Fresh Air Circulator that is activated and implemented between every single layer of the print to ensure no FEP Film Stickings on Glass
RS Coated Glass
Highest UV Transmitting XXX Coated Glass that is totally different than any other laser printer which have the least sticking surface ever achieved.
UV Laser
Combination of laser spot size and laser beam control for fine quality detailed print.
RS Air Flow System
Fresh Air Circulator that is activated and implemented between every single layer of the print to ensure no FEP Film Stickings on Glass
Iconic Unique Design for Compact Usage
Masitte differentiates itself from other printers by having it’s entire motion system components inside of the main case, which only leaves Z-Axis freely elevate. When Z-Axis is in home position(bottomed down) Masitte is 38% smaller. Compared with Its printing area it is the smallest desktop laser SLA 3D Printer ever existed.
- Compact - Will Fit Perfectly
- Easy to Use - Work and Reach from Any Angle
- 360° View - See every side of the print on the Build Plate
- Light - %38 Lighter Than Any Other Laser Desktop Printer
- Silent - Entire system runs inside the main case, you will not hear
Iconic Unique Design for Compact Usage
Masitte differentiates itself from other printers by having it’s entire motion system components inside of the main case, which only leaves Z-Axis freely elevate. When Z-Axis is in home position(bottomed down) Masitte is 38% smaller. Compared with Its printing area it is the smallest desktop laser SLA 3D Printer ever existed.
- Compact - Will Fit Perfectly
- Easy to Use - Work and Reach from Any Angle
- 360° View - See every side of the print on the Build Plate
- Light - %38 Lighter Than Any Other Laser Desktop Printer
- Silent - Entire system runs inside the main case, you will not hear
Non-Stop Successful Prints
Very First Masitte printers that are sold have been in printing non-stop at the highest capacity printing built plate surface entirely full, for the last year they run they achieved a minimum of %95 success rate prints.
Fine Details
High precision laser system with a combination of small laser spot size, precision galvanometers, and a stable linear motion system will print the finest possible details with the highest resolution in every print.
Check high-quality prints printed out of Masitte 3D Printers on our Instagram!
You can finally get your desktop Laser SLA 3D Printer that will bring you high detail prints every time.
Sign-Up Now for our exclusive VIP early-bird discount.
tech Specs
Masitte Dent
Masitte Plus
Masitte Large
Properties
- Technology
- Build Volume
- Layer Thickness
- Connectivity
- Printer Control
- Reduced Separation (RS)
- 15 x 15 x 13 cm
- 30 - 150 microns
- SD Card
- 4.3" Touchscreen
- Reduced Separation (RS)
- 15 x 15 x 19 cm
- 30 - 150 microns
- SD Card
- 4.3" Touchscreen
- Reduced Separation (RS)
- 23 x 23 x 39 cm
- 30 - 150 microns
- SD Card
- 4.3" Touchscreen
Laser
- Wavelength
- Power
- Spot Size
- 405 nm
- 150 mW
- 80 microns
- 405 nm
- 150 mW
- 80 microns
- 405 nm
- 300 mW
- 80 microns
Physical Dimensions
- Dimensions
- Weight
- 28.2 x 29.6 x 50 cm
- 11 kg
- 28.2 x 29.6 x 56 cm
- 12 kg
- 37.5 x 39.4 x 104 cm
- 25 kg
Electrical Requirements
- Voltage
- Frequency
- Power
- 100 - 240 VAC
- 50 - 60 Hz
- Max. 360 W
- 100 - 240 VAC
- 50 - 60 Hz
- Max. 360 W
- 100 - 240 VAC
- 50 - 60 Hz
- Max. 360 W
Software
- Slicer Software
- Supported OS
- Masitte Slicer
- MacOS, Windows
- Masitte Slicer
- MacOS, Windows
- Masitte Slicer
- MacOS, Windows
OUR VERY FİRST USERS
Previous
Next
JOIN US!
Masitte is a reliable, easy to use desktop laser SLA 3D printer that will deliver fine detail prints everytime you use.
Designed for pleasant printing experience.
Sign up now to get your pre-launch discount. Help Masitte to be available for everyone and discover exclusive content & features ahead of our launch!
Launching soon on KICKSTARTER!